New BCast Stainless Steel 400 gallon Cooker-Cooler

SKU: BC-CookCool400ASME-stk

Bast Stainless Products 400 gallon jacketed cook and cool tank - ASME RATED With U1 stamp and NB Listing 
4 mm 316L S.S. inner liner (side and bottom), 3 mm 304 S.S. outer shell,
All interior and exterior surfaces will be polished to a #4 150-grit sanitary finish 
All interior and exterior welds will be ground smooth and ribbon polished,
bridge and cover top with 316L center bridge and 3mm T-316 S.S. 2-piece hinged covers with handles and latch, 
conical bottom with 120° included angle, full sidewall and bottom head insulated with chloride free mineral fiber insulation,
3" flange outlet for flush mount valve, (less valve)18" outlet height,
(2) 2" clamp ports on top bridge, (2) 1.5”x 3”removable Sprayball  (1)1.5 clamp Top mount Thermometer holder with baffle bracket for use with digital thermometer (OPTIONAL quoted below) (1) 316L adjustable baffle>
Full bottom head will be supplied with 2 mm T-304 S.S. dimpled heat transfer surface with (1) 2" inlet and (1) 2" outlet threaded pipe nipple connection and supplied with directional baffling, connections will be connected to internal box headers and the outer sheathing will not be seal welded to the pipe connections.

Top entry dual motion counter-rotating agitator with bottom scrape driven by 5 HP right angle helical bevel Nord-drive gearmotor operating at 20 RPM, inverter duty motor will be 230-460/3/60 TEFC washdown.  (less starter) Nylon Scraper Blade.
Stainless quick release for scraper blades will be included.
Counter-rotating tri-blade impellers, Nord gear motor operating at 88-90 RPM. Motor #2 will be inverter duty 3HP 230-460/3/60 TEFC washdown rated(less starter). Stainless steel. Shaft will be equipped with removable tri blade impeller assembly. Shaft will be through a neoprene slinger and the lower shaft will be supported by a bottom steady bearing with Delrin inserts and Viton elastomers, . Tank is designed for atmospheric pressure @ 325° F. Heat transfer surface is designed and tested for 90PSI rating. ASME U1 stamp with National board number.
(2) removable sprayballs
(4) 4" T-304 S.S. pipe legs with adjustable ball feet, legs will mount to inner cone bottom and extend through outer bottom skin, 
84 ID x 86 1/2" OD x 74" working height, " sidewall height.

Options available @ additional cost:
Safety Grate 
Flush mount valve
Flush mount temperature sensor
Top mount thermometer
Hi-Temp and metal detectable scraper blades
C-Face stainless steel motors (requires adaptor