BCast Stainless 10,000 gallon refrigerated vertical silo tank - built to current 3A standards, 304SS interior with #4 polished product contact surface, all welds striped and polished, 304SS 2mm thick S.S. exterior with 2B finish, all welds striped and polished, inverted 15 degree conical top with 2" polyurethane insulation, silo type bottom with pitch sloped to outlet, sidewalls with 2" polyurethane insulation, 304 S.S. alcove (60"w x 60"h x 29"d with 5/8" slope to front for proper draining), 3/4" S.S. grab bar above side entering manway, heat traced and insulated (black foam insulation with taped joints) stainless steel vent and CIP lines, (3) CIP spray ball assemblies equally spaced around top head radius and removable from exterior, 3" clamp inlet and outlet, (1 ea.) indicating thermometer well, Anderson #412474 RTD well for temperature recorder/controller, King #1777 level shell only, 161 sq. ft. of dimple type heat transfer surface in vertical sidewall zone, 39.2 sq. ft. of dimple type heat transfer surface in bottom zone, total heat transfer surface = 200.2 square feet, heat transfer jacket factory tested at 70 psi and field duty rated for 14.9 psi, heavy duty vertical offset bottom sweep agitation with 2nd propeller type agitator blade approx. at 50% elevation of the vertical agitator shaft, 7.5 HP 230/460-3-60 volt inverter duty washdown motor with approximately 21 RPM output speed, 90.5" outside diameter x 37' overall height.