| Used Tube Heat Exchanger and Equipment |
| Item Number | Description |
|---|
HXU-6X48  | U-TUBE HEAT EXCHANGER, STD 3A STAMPED SHELL AND TUBE HEAT EXCHANGER |
| H-DL-P5T | (2) ALFA-LAVAL MODEL P5 CONNECTOR TERMINALS - 1 ½" TRI-CLAMP PORT. (price is per each) |
| H-DL-P5 | (74) DE LAVAL MODEL P5 HEAT EXCHANGE PLATES. |
| H-DL-P45 | (61) ALFA-LAVAL MODEL P45 HEAT EXCHANGE PLATES - REGASKETED. |
| H-DL-P15T | (3) ALFA-LAVAL MODEL P15 CONNECTOR TERMINALS. (price is per each) |
| H-DL-P14T1 | DELAVAL MODEL P14 STAINLESS STEEL CONNECTOR TERMINAL. |
| H-DL-P14T | (13) ALFA-LAVAL MODEL P14 CONNECTOR TERMINALS. (price is per each) |
| H-DL-P14 | (335) ALFA-LAVAL MODEL P14 HEAT EXCHANGE PLATES - REGASKETED. |
| H-DL-P13T | (9) ALFA-LAVAL MODEL P13 CONNECTOR TERMINALS. |
| H-DL-P13 | (282) ALFA-LAVAL MODEL P13 HEAT EXCHANGE PLATES - REGASKETED. |
| H-DL-H10T | ALFA LAVAL H10 INTERMEDIATE TERMINALS. |
| H-CP-SCT | CREPACO MODEL #SC STAINLESS STEEL CONNECTOR TERMINALS - 2" PORT. |
| H-CP-SC | (323) CREPACO MODEL "SC" HEAT EXCHANGE PLATES. |
| H-CJ-HTT | (17) CHESTER-JENSEN MODEL HT CONNECTOR TERMINALS. (price is per each) |
| H-CJ-HT | (460) CHESTER-JENSEN MODEL HT. HEAT EXCHANGE PLATES - REGASKETED. |
| H-CJ-HMT | (22) CHESTER-JENSEN MODEL HM CONNECTOR TERMINALS. (price is per each) |
| H-CJ-HM | (666) CHESTER-JENSEN HEAT EXCHANGE PLATES. |
| H-CH-HT | (26) CHESTER JENSEN MODEL "HT" STAINLESS STEEL HEAT EXCHANGE PLATES. |
| H-CB-ST | (97) CHERRY-BURRELL MODEL "S" CONNECTOR TERMINALS - 2" & 3" THREADED AND I-LINE PORT. (price is per each) |
| H-CB-S | (288) CHERRY-BURRELL MODEL "S" HEAT EXCHANGE PLATES - REGASKETED. |
| H-CB-435 | CHERRY BURRELL MODEL 435 TITANIUM HEAT EXCHANGE PLATES. |
| H-APV-XB | (8) ASSORTED APV MODEL HX CORNER BOSSES - FOR USE ON CONNECTOR TERMINALS. |
| H-APV-SR35 | (78) APV-SR35 HEAT EXCHANGE PLATES. |
| H-APV-R5T | (20) APV R5 INTERMEDIATE TERMINALS. (price is per each) |
| H-APV-R5 | (979) APV MODEL R5 HEAT EXCHANGE PLATES. (price is per each) |
| H-APV-HMT | (2) APV MODEL HMB CONNECTOR TERMINAL. (price is per each) |
| H-990-01 | CHERRY-BURRELL MODEL SXLAS- 150 STAINLESS STEEL PRESS ASSEMBLY S/N 4712 - 3" I-LINE PORT. |
| H-908-09 | CHERRY-BURRELL MODEL SXLAS-50 PLATE HEAT EXCHANGER S/N 75-5965 - 3" I-LINE PORT. |
| H-2071-11 | APV model CR5 hydraulic stainless steel plate & frame heat exchanger s/n B-9745CR5, 3" #15 ports, double hydraulic tank-up spindle, 108" frame length.
|
| H-2070-10 | 75 gallon non-PMO stainless steel balance tank - bridge and cover top, slope bottom, (6) 3" clamp ports in bridge, 2.5" clamp outlet, mounted on stainless steel legs with adjustable ball feet, 46"dia x 11" straight side x 36"oaht. |
| H-2070-07 | APV model R51 stainless steel heat exchanger frame s/n unknown - 3" I-line ports, size 10 frame. |
| H-2070-06 | 175 Gallon PMO legal rectangular HTST balance tank - 2/3 hinged cover w/ inspection port, slope bottom, multiple clamp ports in bridge, (1) 2 1/2" lower side clamp port, 3" clamp outlet, 64" l x 48" w x 15" deep id, 40 " oaht. |
| H-2037-01 | APV MODEL R51 S.S. HEAT EXCHANGER FRAME S/N 18778 - 3" CLAMP PORTS, SIZE 6 FRAME. |
| H-2036-03 | CHESTER-JENSEN MODEL HMC-55 HEAT EXCHANGER S/N 2661603 - 2 ½" #15 PORTS, DOUBLE TAKE-UP, 72" RAIL LENGTH.
|
| H-2036-02 | CHESTER-JENSEN MODEL HMC-95 HEAT EXCHANGER S/N 12651595 - 2 ½" #15 PORTS, DOUBLE TAKE-UP, 100" RAIL LENGTH. |
| H-2036-01 | ALFA-LAVAL MODEL H10-RC S.S. TIE BAR STYLE PLATE HEAT EXCHANGER S/N 3898 - 3" CLAMP CONNECTIONS, 120" RAIL LENGTH.
|
| H-2032-30 | APC SERIES 700 2" S.S. AIR-ACTUATED FLOW DIVERSION VALVE S/N 1594-83 - CLAMP PORTS, LESS PANEL. |
| H-2032-28 | YORK DOUBLE CASE HTST CONTROLLER - (1) OP1668 RECORDER S/N 352RV368-676 WITH RANGE OF 127-220º F, 230 V, AND (1) OP1600 RECORDER S/N 352RV368-676 WITH RANGE OF 25-220º F, 230 V, CASE DIMENSIONS 40" W X 33" H, 72" OAHT, MOUNTED ON S.S. FRAME W/ ADJUSTABLE BALL FEET. |
| H-2032-27 | 30 GALLON NON-PMO STAINLESS STEEL BALANCE TANK - REMOVABLE COVER WITH 2 ½" CLAMP INLET AND 7" INSPECTION PORT, SLOPE BOTTOM, 2" #15 OUTLET, (1) 2 ½" #15 UPPER SIDE PORT, (1) 2" CLAMP LOWER SIDE PORT, MOUNTED ON S.S. LEGS, 25" DIA. X 15" STRAIGHT SIDE, 22" OAHT. |
| H-2032-18 | CHESTER-JENSEN/YORK MODEL HMC-63 HEAT EXCHANGER S/N 1263-293 - 2 1/2" #15 PORTS, SINGLE TAKE UP, 49 1/2" RAIL LENGTH. |
| H-2024-07 | APV R51 S.S. HEAT EXCHANGER FRAME S/N 26591 - 4" CLAMP PORTS, SIZE 5 FRAME. |
| H-2024-06 | APV R56-S S.S. HEAT EXCHANGER FRAME S/N 14687 - 3" AND 4" CLAMP PORTS, SIZE 4 FRAME. |
| H-2023-03 | CHERRY BURRELL MODEL 672L THERMUTATOR HEAT EXCHANGER S/N 1311 - 316L STAINLESS STEEL, 3" INLET/OUTLET, 15 HP 3PH 1770 RPM DRIVE, 60:1 GEAR RATIO, MAWP 400 PSI PRODUCT / 250 PSI MEDIA, MAX. TEMPERATURE 400 DEG. F PRODUCT / 400 DEG. F MEDIA. |
| H-2013-04 | APV R50 FOLLOWER |
| H-2013-03 | APV R50 TAKE UP SCREW |
| H-2013-02 | APV R50 TAKE UP SCREW |
| H-2013-01 | APV R50 BACK END SUPPORT |
| H-2002-56 | APV TYPE HXL6 MILD STEEL HEAT EXCHANGER S/N 2410/11465 -2" CLAMP PORTS, 37" RAIL LENGTH, 48 PLATES. |
| H-2002-52 | WAUKESHA CHERRY BURRELL MODEL WVALVE02023 2" FLOW DIVERSION VALVE S/N 287054-01 - 4" ACTUATORS, ROUND BODY, CLAMP PORTS, LESS PANEL. |
| H-2002-45 | CREPACO 20 GAL. NON-PMO STAINLESS STEEL BALANCE TANK S/N 6135 - REMOVABLE LID, SLOPE BOTTOM, 2" CLAMP OUTLET, (3) 3" BUTTWELD TOP PORTS, (1) 2 ½" #15 TOP SIDE PORT, MOUNTED ON S.S. LEGS WITH BALL FEET, 26" DIA. X 9" STRAIGHT SIDE, 30" OAHT. |
| H-2002-27 | 20 GALLON NON-PMO STAINLESS STEEL BALANCE TANK - REMOVABLE LID, SLOPE BOTTOM, 2 ½" CLAMP OUTLET, 2 ½" #15 SIDE PORT, S.S. LEGS, 24" DIA. X 12" STRAIGHT SIDE. |
| H-2002-26 | TUBE STYLE HOT WATER SET - WITH 2 HP MP PUMPS RECIRCULATING PUMP, 3500 RPM, 230/460, TUBE DIM: 4" DIA. X 47" L. |
| H-2002-22 | DELAVAL MODEL P13RC PLATE HEAT EXCHANGER S/N 8632 - 2" CLAMP PORTS. |
| H-1992-09 | ALFA-LAVAL TYPE P45-RC S.S. PRESS ASSEMBLY S/N 3839 - 3" TRI-CLAMP PORTS, 55" RAIL LENGTH. |
| H-1992-05 | CHESTER-JENSEN MODEL HG S.S. HYDRAULIC PRESS ASSEMBLY S/N 3712134 - SIZE 90, 3" CLAMP PORTS, (3) INTERMEDIATE TERMINALS, 98" RAIL LENGTH. |
| H-1986-28 | CHERRY BURRELL MODEL 35955VA VOTATOR SCRAPED SURFACE HEAT EXCHANGER S/N A4513 - 20 HP DRIVE, VOLUME 1365 CU. IN., SHELL MAWP 400 PSI @ 375 DEG. F, JACKET MAWP 150 PSI @ 375 DEG. F, 14" DIA. BARREL, 147" OAL (INCLUDING DRIVE), MFG. 1987. |
| H-1986-27 | CHERRY BURRELL MODEL 36100VA VOTATOR SCRAPED SURFACE HEAT EXCHANGER S/N A4661 - 20 HP DRIVE, VOLUME 1365 CU. IN., SHELL MAWP 400 PSI @ 375 DEG. F, JACKET MAWP 150 PSI @ 375 DEG. F, 14" DIA. BARREL, 147" OAL (INCLUDING DRIVE), MFG. 1988. |
| H-1986-23 | 50 GAL. NON-PMO STAINLESS STEEL BALANCE TANK – ½ HINGED COVER, SLOPE BOTTOM, (2) 2 ½" AND (1) 2" CLAMP TOP PORTS, 3" CLAMP OUTLET, MOUNTED ON S.S. LEGS W/ ADJUSTABLE BALL FEET, 36" DIA. X 13" STRAIGHT SIDE X 35" OAHT. |
| H-1986-22 | DE LAVAL 100 GAL. NON-PMO S.S. BALANCE TANK S/N 17674 – BRIDGE AND COVER TOP W/ (2) 7 ½" INSPECTION PORTS, SLOPE BOTTOM, 3" CLAMP TOP PORT, 2 1/2" OUTLET, MOUNTED ON S.S. LEGS W/ ADJUSTABLE BALL FEET, 51" DIA. X 13" STRAIGHT SIDE X 27" OAHT. |
| H-1980-09 | FELDMEIER S.S. TRIPLE TUBE HEAT EXCHANGER CONSISTING OF (16) 252" RUNS, ON S.S. FRAME, W/ 4 MANIFOLDS. |
| H-1972-48 | TAYLOR 352 HTST CONTROLLER S/N 352RV368-2327 - OP1668 AND OP1600 CHARTS, 36" W X 52" H, S.S. LEGS W/ ADJUSTABLE BALL FEET. |
| H-1972-45 | TAYLOR MODEL VJ3 2 ½" FLOW DIVERSION VALVE S/N 39VJ32310-7466 - MAX 100 PSI, AIR SUPPLY 65 PSI, #15 PORTS, 115/230V. |
| H-1972-44 | 3" STAINLESS STEEL HTST HOLDER TUBE CONSISTING OF (6) 90" RUNS, MOUNTED ON STAINLESS STEEL FRAME, 55 ½" OAHT X 102" OAL, ADJUSTABLE PAD FEET.
|
| H-1972-35 | 50 GAL. NON-PMO STAINLESS STEEL BALANCE TANK – REMOVABLE LID WITH 10 ½” SQUARE INSPECTION PORT, SLOPE BOTTOM, 2” #15 OUTLET, 2” #15 TOP SIDE PORT, 3” #15 LOWER SIDE PORT, MOUNTED ON M.S. LEGS WITH ADJUSTABLE BALL FEET, 28” DIA. X 20” STRAIGHT SIDE, 29” OAHT. |
| H-1972-30 | CHESTER-JENSEN (YORK) MODEL HM-63 S.S. PRESS ASSEMBLY S/N 10564544 – 2 1/2" #15 THREADED PORTS, SINGLE TAKE-UP, 68 1/4" RAIL LENGTH.
|
| H-1972-25 | 30 GAL. NON-PMO STAINLESS STEEL BALANCE TANK – REMOVABLE LID WITH 9" SQUARE INSPECTION PORT, SLOPE BOTTOM, 2” CLAMP OUTLET, 2" CLAMP TOP SIDE PORT, 2 ½” #15 LOWER SIDE PORT, MOUNTED ON M.S. LEGS WITH ADJUSTABLE BALL FEET, 27" DIA. X 14" STRAIGHT SIDE, 27" OAHT. |
| H-1972-24 | CHESTER-JENSEN (YORK) MODEL HM-55 S.S. PRESS ASSEMBLY S/N 8483021 – 2 ½” #15 THREADED PORTS, SINGLE TAKE-UP, 60 ¼” RAIL LENGTH. |
| H-1972-23 | CHESTER-JENSEN MODEL HMC-90 S.S. PRESS ASSEMBLY S/N UNKNOWN – 2 ½” #15 THREADED PORTS, DOUBLE TAKE-UP, 95” RAIL LENGTH. |
| H-1972-17 | CHESTER-JENSEN (YORK) MODEL HM-45 S.S. PRESS ASSEMBLY S/N 4513537 – 2 ½" #15 THREADED PORTS, SINGLE TAKE-UP, 50 ¼" RAIL LENGTH.
|
| H-1970-25 | ALFA-LAVAL MODEL H10-RC S.S. TIE BAR STYLE PLATE HEAT EXCHANGER S/N 3979 - 3" CLAMP CONNECTIONS, MAX. TEMP 285ºF, MAX. WORKING PRESSURE 10 BAR, 121” RAIL LENGTH, 90” OAHT. |
| H-1963-06 | ALFA LAVAL MODEL H10-FMC S.S. TIE BAR STYLE PLATE HEAT EXCHANGER S/N 4240 – 3" #15 CONNECTIONS, MAX. TEMP 285ºF, MAX. PRESSURE 10 BAR, 121” RAIL LENGTH, 90” OAHT. |
| H-1963-01 | ALFA LAVAL MODEL H10-FMC S.S. TIE BAR STYLE PLATE HEAT EXCHANGER S/N 4238 - 3" #15 CONNECTIONS, MAX. TEMP 235ºF, MAX. PRESSURE 10 BAR, 73” RAIL LENGTH, 90” OAHT .
|
| H-1961-32 | TRI-CLOVER 262 SERIES 3" FLOW DIVERSION VALVE WITH CONTROL PANEL S/N 216 - PANEL #48-2762-2, DWG # 91-1307. |
| H-1961-23 | 3" HOLDER TUBE FOR 80,000 LB/HR SYSTEM CONSISTING OF (14) 9' RUNS, CLAMP PORTS, MOUNTED ON S.S. FRAME, 33" W X 118" L X 117" OAHT. |
| H-1961-09 | TACO MODEL G12214TS1C1AT00 2-PASS SHELL & TUBE HEAT EXCHANGER S/N A12808 - 4” INLET AND OUTLET, ¾” COPPER TUBES, 280.6 SQ. FT. HEAT EXCHANGE SURFACE, DIMENSIONS 100 ¼” OAL. X 12 ¾ ” DIA., NATIONAL BOARD #186911, MAX. W.P. 150 PSI @ 375° F., MFG. 2000. |
| H-1960-10 | ALFA-LAVAL MODEL H10-RC S.S. TIE BAR STYLE PLATE HEAT EXCHANGER S/N 3988 - 3" CLAMP CONNECTIONS, MAX. TEMP 285ºF, PRESSURE 7 BAR, 145” RAIL LENGTH, 77” OAHT. |
| H-1930-W32 | TAYLOR MODEL VJ3 FLOW DIVERSION VALVE S/N 39VJ31310-765 |
| H-1930-W31 | 20 GAL. NON-PMO STAINLESS STEEL BALANCE TANK – REMOVABLE COVER WITH 2” #15 INLET, SLOPE BOTTOM, 2 ½” CLAMP OUTLET, (1) 2 ½” #15 LOWER SIDE PORT, MOUNTED ON S.S. LEGS, 24” DIA. X 12” STRAIGHT SIDE, 22” OAHT. |
| H-1930-09 | 50 GAL. NON-PMO STAINLESS STEEL BALANCE TANK – OPEN TOP, SLOPE BOTTOM, (2) 2” CLAMP OUTLETS, MOUNTED ON S.S. LEGS WITH PAD FEET, 25” DIA. X 24” STRAIGHT SIDE, 34” OAHT. |
| H-1925-05 | APV MODEL CR5 FOLLOWER BLOCK |
| H-1925-03 | APV MODEL CR5 HYDRAULIC S.S. PLATE & FRAME HEAT EXCHANGER S/N B-4536 – 3” #15 AND CLAMP PORTS, DOUBLE HYDRAULIC TAKE-UP SPINDLE, 96” RAIL LENGTH, APPROX. DIMENSION 101" H X 112" OAL X 37"W. |
| H-1925-02 | APV PARAFLOW MODEL HMBM PRESS ASSEMBLY S/N UNKNOWN – DOUBLE SPINDLE TAKE-UP, 62 ½” RAIL LENGTH, 2 ½” THREADED PORT. |
| H-1920-98 | Set of (2) 137" rails for APV model R51 size 7 frame heat exchanger. |
| H-1920-95 | WALKER MODEL SB 22 GAL. NON-PMO STAINLESS STEEL BALANCE TANK S/N 2968 – 2 PIECE COVER, SLOPE BOTTOM, 2” CLAMP OUTLET, (1 EA.) 2” AND 4” TRI-CLAMP SIDE PORTS, MOUNTED ON S.S. LEGS WITH ADJUSTABLE BALL FEET, 24” DIA. X 11” STRAIGHT SIDE X 29” OAHT. |
| H-1920-93 | TRI-CLOVER MODEL 262-121-2 ½ -316 2 ½" FLOW DIVERSION VALVE S/N 122524 – CLAMP PORTS, WITH PANEL. |
| H-1920-92 | 2 ½” STAINLESS STEEL HTST HOLDER TUBE CONSISTING OF (6) 120"’ RUNS, MOUNTED ON STAINLESS STEEL FRAME, CLAMP PORTS, 63” OAHT. |
| H-1920-91 | 3” STAINLESS STEEL HTST HOLDER TUBE CONSISTING OF (8) 96"’ RUNS, MOUNTED ON STAINLESS STEEL FRAME, CLAMP PORTS, 68” OAHT. |
| H-1920-90 | 3” STAINLESS STEEL HTST HOLDER TUBE CONSISTING OF (8) 94"’ RUNS, MOUNTED ON STAINLESS STEEL FRAME, CLAMP PORTS, 68” OAHT. |
| H-1920-77 | 25 GALLON NON-PMO STAINLESS STEEL BALANCE TANK – OPEN TOP, SLOPE BOTTOM, 2 ½” CLAMP OUTLET, MOUNTED ON STAINLESS STEEL LEGS, 24” DIA. X 14” STRAIGHT SIDE, 73” OAHT. |
| H-1920-101 | Bell & Gossett model SU-63-2 HTST hot water set s/n 91U78528-02-3 - 2" inlet and outlet, mounted on mild steel frame, ¾" copper tubes, tube dimensions 40 1/8"l x 6 5/8"dia NB #21840, max. wp 150psi @ 375° F., min. temp - 20° F @ 150psi, complete with steam trap and 2hp pump, 3450rpm, 208-230/460v. |
| H-1917-08 | APV MODEL R51 S.S. HEAT EXCHANGER FRAME S/N 26678 - 3" THREADED PORTS, SIZE 1 FRAME. |
| H-1909-03-CN | CHESTER-JENSEN (YORK) MODEL HM-63 S.S. PRESS ASSEMBLY S/N 8533920 –2 ½” #15 THREADED PORTS, SINGLE TAKE-UP, 68 ¼” RAIL LENGTH, (2) INTERMEDIATE TERMINALS, (64) PLATES. |
| H-1909-02-CN | S.S. TRIPLE TUBE HEAT EXCHANGER CONSISTING OF (24) 360"’ RUNS OF 1.5" X 2" X 2.5", MOUNTED ON STAINLESS STEEL FRAME, 3” CLAMP PORTS, 84” OAHT. |
| H-1908-08 | APV MODEL ER-51 PLATE HEAT EXCHANGER FRAME S/N 25156 - 3" CLAMP PORTS, DOUBLE SPINDLE TAKE-UP, SIZE 3 FRAME. |
| H-1904-22 | TAYLOR VJ2 FLOW DIVERSION VALVE |
| H-1904-20 | 30 GAL. NON-PMO STAINLESS STEEL BALANCE TANK – REMOVABLE LID WITH 6” INSPECTION PORT, SLOPE BOTTOM, 2” CLAMP OUTLET, MOUNTED ON S.S. LEGS WITH ADJUSTABLE FEET, 24” DIA. X 17” STRAIGHT SIDE, 25” OAHT. |
| H-1904-06 | 40 GAL. NON-PMO STAINLESS STEEL BALANCE TANK – OPEN TOP, REVERSE DISH BOTTOM, 2 ½” I-LINE OUTLET, (1) 3” #15 SIDE PORT, MOUNTED ON S.S. LEGS WITH ADJUSTABLE FEET, 30” DIA. X 15” STRAIGHT SIDE, 22” OAHT. |
| H-1904-03 | CHESTER-JENSEN MODEL HMC-95 HEAT EXCHANGER S/N 859774 - 2 ½” #15 PORTS, DOUBLE TAKE-UP, 100” RAIL LENGTH. |
| H-1900-W9 | 50 ½” LONG TAKE-UP BAR FOR APV MODEL R51 FRAME HEAT EXCHANGER. |
| H-1900-W8 | SET OF (2) 126” RAILS FOR APV MODEL R51 SIZE 6 FRAME HEAT EXCHANGER. |
| H-1900-W10 | 50 ½” LONG TAKE-UP BAR FOR APV MODEL R51 FRAME HEAT EXCHANGER. |
| H-1891-22 | 3” STAINLESS STEEL HTST HOLDER TUBE CONSISTING OF (10) 132"’ RUNS, MOUNTED ON STAINLESS STEEL FRAME, CLAMP PORTS, 77” OAHT. |
| H-1886-W9 | 70 GAL. NON-PMO STAINLESS STEEL BALANCE TANK – REMOVABLE LID WITH 8” INSPECTION PORT, SLOPE BOTTOM, 2 ½” CLAMP OUTLET, (1) 4” TRI-CLAMP SIDE PORT, (1) 2 ½” TRI-CLAMP SIDE PORT, (6) 2” TRI-CLAMP SIDE PORTS, MOUNTED ON S.S. LEGS WITH ADJUSTABLE FEET, 39” DIA. X 14” STRAIGHT SIDE, 26” OAHT. |
| H-1886-W13 | APV MODEL SR11 S.S. PRESS ASSEMBLY S/N 21995-2 – 1 ½” CLAMP PORTS, 34" OAHT X 32 ½” RAIL LENGTH. |
| H-1886-W12 | APV MODEL SR11 S.S. PRESS ASSEMBLY S/N 21995 – 1 ½” CLAMP PORTS, 34" OAHT X 32 ½” RAIL LENGTH. |
| H-1886-W10 | APV MODEL SR15-S S.S. PRESS ASSEMBLY S/N 17448-2 – WITH 53 PLATES, 1 ½” CLAMP PORTS, 35" OAHT X 12" W X 25 ½" RAIL LENGTH. |
| H-1885-02 | CHERRY BURRELL MODEL SAS125 STAINLESS STEEL PLATE HEAT EXCHANGER FRAME S/N 53-1388C – 2” THREADED PORTS, WITH 44 PLATES, 1 INTERMEDIATE TERMINAL, 77” RAIL LENGTH, 71” OAHT. |
| H-1871-14 | ALFA-LAVAL MODEL M10-BFG MILD STEEL PLATE HEAT EXCHANGER S/N 30102-85359 - 4” TRI-CLAMP AND 4” FLANGE PORTS, 36” RAIL LENGTH, 39” OAHT, WITH 6 PLATES |
| H-1866-64 | VERTICAL TUBE STYLE HOT WATER SET - 3” CLAMP PORTS, WITH 5 HP RECIRCULATING PUMP, 1725 RPM, 230/460, 78” OAHT. |
| H-1866-50 | TRI-CLOVER 762 SERIES 3” FLOW DIVERSION VALVE WITH S.S. CONTROL PANEL #48-2762-2 |
| H-1866-09 | APV MODEL R51 S.S. HEAT EXCHANGER FRAME S/N 18882 - 3" CLAMP PORTS, SIZE 8 FRAME. |
| H-1836-03 | TRI-CLOVER NO. 262 3" FLOW DIVERSION VALVE - LESS CONTROL PANEL. |
| H-1822-31 | 2 ½" STAINLESS STEEL HTST HOLDER TUBE CONSISTING OF (12) 90"' RUNS, MOUNTED ON STAINLESS STEEL FRAME - FOR 2,500 GPH MILK H.T.S.T. SYSTEM. |
| H-1822-23 | CHESTER-JENSEN MODEL HMC HEAT EXCHANGER S/N 1742425 - SIZE 63, 2 1/2" CLAMP PORTS, DOUBLE TAKE UP, 105" OAL, MFG. 3/74. |
| H-1822-22 | FELDMEIER 3 PASS 1.5" X 2" X 2.5" TRIPLE TUBE 43' LONG. |
| H-1820-11 | APV MODEL CR5 HYDRAULIC S.S. PLATE & FRAME HEAT EXCHANGER S/N D-6839-CR5, 4" PORTS, DOUBLE HYDRAULIC TAKE-UP SPINDLE, APPROX. DIMENSION 101" H X 147" OAL X 37"W, 120" RAIL LENGTH, LESS CONNECTOR TERMINALS & PLATES. (PARTS ONLY) |
| H-1798-06 | 50 GAL. RECTANGULAR H.T.S.T. BALANCE TANK - 2" #15 OUTLET, 28" L. X 28" W. X 17" DEEP. I.D. |
| H-1797-01 | APC 3" STAINLESS STEEL AIR-OPERATED FLOW DIVERSION VALVE SET WITH MICRO SWITCHES AND SOLENOIDS, LESS PANEL. |
| H-1796-01 | CHESTER JENSEN MODEL HMC SIZE 110 PLATE HEAT EXCHANGER S/N 1752518 – 2 ½” CLAMP PORT, #15 THREADED PORT, 11’ X 75” OAL. |
| H-1774-43 | CREPACO NON-PMO 20 GAL. STAINLESS STEEL BALANCE TANK - REMOVEABLE COVER, 2" PORT W/MECHANICAL FLOAT, 2" #15 OUTLET, 24 ½" X 10" STRAIGHT SIDE, MOUNTED ON 5" STAINLESS STEEL LEGS. |
| H-1774-21 | CREPACO MODEL #SC STAINLESS STEEL TIE BAR STYLE HEAT PLATE HEAT EXCHANGER S/N SC-3488 - 1 ½" #15 THREADED PORT, 24" RAIL LENGTH. |
| H-1731-19 | APV TYPE HMB STAINLESS STEEL PRESS ASSEMBLY S/N MC-54-1038 - 2 ½" PORT, 85" RAIL LENGTH. |
| H-1660-27 | CHERRY-BURRELL 30 GALLON NON-PMO S.S. SINGLE SHELL BALANCE TANK, 3" #15 SIDE PORT, 2" #15 OUTLET, M.S. LEGS, 28" DIA X 20" STRAIGHT SIDE X 40" OAHT, LESS COVER. |
| H-1660-07 | DE LAVAL MODEL P14RC, STAINLESS STEEL PRESS ASSEMBLY S/N 2710 - 2 1/2" TRI-CLAMP PORT. |
| H-1629-32 | CHERRY-BURRELL MODEL SAS-75 STAINLESS STEEL PLATE HEAT EXCHANGE FRAME ONLY S/N 57-2B12 - 2" PORT. |
| H-1593-06-CN | NON PMO 60 GAL. BALANCE TANK - 3" BOTTOM OUTLET, 4" SIDE PORT, (8) ½" TOP INLETS, REMOVABLE COVER, MOUNTED ON 10" S.S. LEGS, 40" DIA. X 12" DEEP. |
| H-1592-18 | CHERRY-BURRELL MODEL SAS50 PLATE HEAT EXCHANGER FRAME S/N 49-830 - 50" RAIL LENGTH, 2" THREADED PORT. |
| H-1575-06 | APV MODEL HMBM PRESS ASSEMBLY S/N 15035 - 56" RAIL LENGTH, 2 ½" THREADED PORT. |
| H-1568-01 | CHERRY-BURRELL MODEL SLAS-100 STAINLESS STEEL PLATE HEAT EXCHANGE FRAME -S/N 60-2900. |
| H-1534-03 | CHESTER -JENSEN MODEL 45HTC PLATE HEAT EXCHANGER -FRAME ONLY S/N 560868 - 2" #15 PORT. |
| H-1532-07 | CHERRY-BURRELL 30 GAL. NON- PMO STAINLESS STEEL BALANCE TANK - 2" #15 OUTLET WITH COVER. |
| H-1517-13 | APC 2" STAINLESS STEEL AIR-ACTUATED FLOW DIVERSION VALVE S/N 1816-85 - LESS CONTROL PANEL. |
| H-1510-71 | APV MODEL HMB STAINLESS STEEL PRESS ASSEMBLY S/N 1797-2979 - 2 ½" TRI-CLAMP PORT, 66" RAIL LENGTH. |
| H-1510-104 | CHESTER-JENSEN HMC SIZE 76 PLATE HEAT EXCHANGER S/N 5712187 - 124" RAIL LENGTH, 2 ½" #15 PORT, TRIPLE TAKE UP. |
| H-1497-08 | TRI-CLOVER NO. 262-121-2 ½" FLOW DIVERSION VALVE - LESS CONTROL PANEL. |
| H-1494-09 | TRI-CLOVER 2 ½" AUTOMATIC AIR-ACTUATED H.T.S.T. FLOW DIVERSION VALVE. |
| H-1467-01 | ALFA-LAVAL MODEL P14-RB STAINLESS STEEL PRESS ASSEMBLY S/N 32209-0133 - 2 ½" PORT, 96" RAIL LENGTH. |
| H-1067-03 | CHERRY-BURRELL MODEL SLAHS STAINLESS STEEL PRESS ASSEMBLY S/N 75-60-2854 - 2" I-LINE PORT, 74" RAILS. |
| BC-BALTANK75 | NEW BCast Stainless Products 75 gallon PMO style HTST balance tank - raised bridge with (5) 2" ti-clamp inlets, 2" tri-clamp level sensor port in bottom sidewall opposite outlet, 3" tri-clamp outlet connection, 39" dia x 16" straight side x 29" oaht. |
| BC-BALTANK50 | NEW BCast Stainless Product 50 gallon PMO style HTST balance tank - raised bridge with (4) 2" tri-clamp inlets, 2" tri-clamp level sensor port in bottom sidewall opposite outlet, 2.5" tri-clamp connection, 30" dia. x 41" oaht. |
| BC-BALTANK40 | NEW BCast Stainless Products 40 gallon PMO style HTST balance tank - raised bridge with (4) 2" tri-clamp inlets, 2" tri-clamp level sensor port in bottom sidewall opposite outlet, 2" tri-clamp outlet connection, 28" dia. x 33" oaht. |
| BC-BALTANK30 | NEW BCast Stainless Products 30 gallon PMO style HTST balance tank - raised bridge with (4) 2" tri-clamp inlets, 2" tri-clamp level sensor port in bottom sidewall opposite outlet, 2" tri-clamp outlet connection, 26" dia. x 38" oaht. |
PRODUCTS:
